PCI Express®3.0 Base 接收端自动化测试软体Tektronix BERTScope™ (GRL-PCIE3-BASE-RX)

概述

GRL的PCI Express®3.0 Base Specification接收端自動化測試軟體用於Tektronix BERTScope™ BSA/BSX (GRL-PCIE3-BASE-RX)提供自動簡單且有效率的測試方案，依據PCIe 3.0 Base (ASIC) Specification.
GRL-PCIE3-BASE-RX整合BERTScope和Tek示波器，自動校準眼圖並測試Rx規範和抖動容限。採用PCI-SIG標準測試方法，GRLPCIE3-BASE-RX使用Seasim統計數據眼圖模擬器建立DDJ和最終校準的眼圖。GRL-PCIE3-BASE-RX提供簡單的使用者介面，可自動執行複雜的PCIe測試，顯著縮短設備校準時間，並可在任何基於Windows 7或Windows 8 OS的PC或示波器上執行。

主要功能

• Automate PCIe3.0 Rx Base Spec Compliance using Tektronix test equipment
• Perform Receiver Jitter Tolerance testing at the push of a button
• Reduce technical risk using an industry-accepted calibration methodology
• Achieve consistent results with rapid test execution

應用規範

• Data Rates: 8 GT/s; 5 GT/s (PCIe 2.0) planned for future release
• Supported Receiver Test: Common Clock Architecture
• This application is compatible with:
  • Tektronix BERTScopeTM BSA, 8Gb/s or above
  • Tektronix Real-Time Oscilloscope (DPO/MSO70000DX) 16 GHz or above
  • Tektronix DPOJET (Jitter and Eye Analysis) Software
  • Tektronix CR125A Clock Recovery Unit
  • Tektronix DPP125C Digital Pre-Emphasis Processor
  • Tektronix AFG3252C Arbitrary Function Generator
  • Tektronix Combiner
  • BNC to SMA adapter
  • ISI Channel (Variable or Fixed):
    • Variable – ACE Unitek CLE1000-A2
    • Fixed – BERTScopeTM ISI Boards
  • Additional accessories - refer to product datasheet

GRL-PCIE3-BASE-RX - PCI Express® 3.0 Base Specification Receiver Test Automation Software.

Prices are subject to change without notice.